The blue screen of death shows up every 20mins or so after I boot it up and starts mining... The stop code almost are "memory management" and sometimes "critical structure corruption". I have no idea how to fit it and have been working on it for few days already... Here is the list of what I have done..
- updated all the windows drivers and gpu drivers
- BIOS enabled mining mode, set all to PCIe GEN1
- set virtual memory to 16gb
- Done the chkdsk and memory diagnostic, nothing is wrong
My config as follow:
Mobo: BIOSTAR TB250-BTC
RAM: 8gb DDR4 2133
HDD: 120gb SSD
GPU: GTX1070 6gb OC x4
PSU: Cooler Master 1200w
all GPUs use USB risers to connect to the mobo.
When I ran Claymore and everything looks fine, with default setting I got 25.5-26 mhs (eth) & 350mhs (SIA) for each card and OC with +200 memory its around 27.8mhs & 400mhs. However, the blue screen still pops up no matter if I overclock or not... it just shows up everytime I starts mining. I have been struggling to fix this for awhile and really needed help from you guys! I dun mind tipping a bit ETH to you even tho it really not much for what I have mined in this few days.. will be much appreciated!!!!
The error message from Event viewer...
Log Name: System
Date: 16/7/2017 10:59:45 AM
Event ID: 41
Task Category: (63)
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.